2020年12期
刊物介紹
本學報1988年創刊，中國航空學會主辦，原為中文版《航空學報》選刊，1996年開始改為直接從來稿中錄用文章，兩刊不再重復。主要欄目有空氣動力學、飛行力學、自動控制、航空電子、發動機、材料、制造工藝及飛行器設計等。
CHINESE JOURNAL OF AERONAUTICS
- A brief review of alternative propellants and requirements for pulsed plasma thrusters in micropropulsion applications
- Influences of characteristic parameters on starting-up process of an arcjet thruster
- Coupling plasma plume of a low-power magnetically shielded Hall thruster with a hollow cathode
- Advances in critical technologies for hypersonic and high-enthalpy wind tunnel
- A review on carrier aircraft dispatch path planning and control on deck
- Effects of Mach numbers on Magnus induced surface pressure
- Improved local amplification factor transport equation for stationary crossflow instability in subsonic and transonic flows
- Water takeoffperformance calculation method for amphibious aircraft based on digital virtual flight
- Design and experimental study of a new flapping wing rotor micro aerial vehicle
- CFD/CSD-based flutter prediction method for experimental models in a transonic wind tunnel with porous wall
- Prediction of pilot workload in helicopter landing after one engine failure
- Study of riblet drag reduction for an infinite span wing with different sweep angles
- Modulation of driving signals in flow control over an airfoil with synthetic jet
- Strong interactions of incident shock wave with boundary layer along compression corner
- An efficient regulation approach for tomographic reconstruction in combustion diagnostics based on TDLAS method
- Theoretical study of ullage washing with mixed inert gas in a non-equilibrium state
- Numerical investigation on flow nonuniformityinduced hysteresis in scramjet isolator
- Transient flow characteristics and performance of a solid rocket motor with a pintle valve
- Topology optimization in lightweight design of a 3D-printed flapping-wing micro aerial vehicle
- Extension of continuous scanning laser Doppler vibrometry measurement for complex structures with curved surfaces
- Physical model for acoustic resonance in annular cavity structure
- Optimization and analysis of winglet configuration for solar aircraft
- A dynamic modeling approach for nonlinear vibration analysis of the L-type pipeline system with clamps
- Semi-analytical model for flat indentation of metal materials and its applications
- Dynamics response analysis of airborne external storage system with clearance between missile-frame
- Intrinsic physical relationships between rotor modal shapes and instantaneous vibrational energy flow transmission characteristics: Theoretical and numerical analysis and application
- Team effectiveness evaluation and virtual reality scenario mapping model for helicopter emergency rescue
- Gaussian fitting based optimal design of aircraft mission success space using multi-objective genetic algorithm
- Modeling and analysis of solar Doppler difference bias with arbitrary rotation axis
- Lightweight hybrid visual-inertial odometry with closed-form zero velocity update
- Coning motion instability of spinning missiles induced by the delay of strap-down seeker
- An enhanced least squares residual RAIM algorithm based on optimal decentralized factor
- Robust fault-tolerant attitude control for satellite with multiple uncertainties and actuator faults
- Dual smoothing ionospheric gradient monitoring algorithm for dual-frequency BDS GBAS
- Acceleration tracking control for a spinning glide guided projectile with multiple disturbances
- Evasion guidance algorithms for air-breathing hypersonic vehicles in three-player pursuit-evasion games
- Reliability evaluation of avionics system with imperfect fault coverage and propagated failure mechanisms
- Influence mechanism of machining angles on force induced error and their selection in five axis bullnose end milling
- Coating deposition regularity depended on orientation difference in PS-PVD plasma jet
- Resistance welding of glass fiber reinforced thermoplastic composite: Experimental investigation and process parameter optimization
- Deformation behaviors of four-layered U-shaped metallic bellows in hydroforming
- An allowance allocation method based on dynamic approximation via online inspection data for deformation control of structural parts
- A constitutive model coupling damage and material anisotropy for wide stress triaxiality
- Simulation of multi-axis grinding considering runout based on envelope theory
- Chatter stability and precision during high-speed ultrasonic vibration cutting of a thin-walled titanium cylinder
- Whole-process modeling of titanium disc forming for gradient distributions of temperature and deformation
- Conceptual design, modeling and compliance characterization of a novel 2-DOF rotational pointing mechanism for fast steering mirror
- SUBJECT INDEX OF CHINESE JOURNAL OF AERONAUTICS （2020）
- ACKNOWLEDGEMENTS TO REVIEWERS（2020）