總 目 次

篇 名作者 卷（期）：頁

Cu含量對噴射成形7055鋁合金微觀組織和力學性能的影響······················································································陸正萍 ,張楨 ,蔣云澤 39（1）： 1

Mg-7Gd-3Y-1Nd-2Zn-0.5Zr合金高溫熱變形行為研究·················································李 蒙 ,王 新 ,張永強 ,王 儉 ,徐 哲 ,張平輝 39（1）： 6

納米Al2O3顆粒對Cu-Al2O3性能的影響········································································陳 渝 ,屠曉倩 ,王柳幸 ,付亞波 39（1）： 15

Al2O3/WO3/ZrO2催化劑的制備及在酯交換反應中的研究········································································何 垚 ,文振中 ,楊 丹 ,孟志強 39（1）： 19

ZnO/Bi2WO6異質結的制備及光催化制氫研究······························································································司夢銀 ,崔立峰 39（1）： 25

316L不銹鋼與CaSiO3復合材料選擇性激光熔化制備工藝····························································馬錚杰 ,任 燦 ,嚴 彪 ,王聯鳳 ,程靈鈺 39（1）： 31

Al-Zn-Mg-Cu系鋁合金微合金化的研究進展···················································································劉懿芳 ,田 偉 ,孫 玥 39（1）： 38

CO2催化重整生物質焦油金屬催化劑的研究進展·················································蔡 晴 ,張瑞新 ,王燕剛 ,康詩飛 ,左元慧 ,崔立峰 39（1）： 42

鋰離子電池硅/碳負極材料的制備與應用········································································劉旭燕 ,朱新杰 ,陸友才 ,潘 登 39（1）： 49

有機朗肯循環系統研究綜述········································································黃雅婷 ,陶樂仁 ,黃理浩 ,喬家廣 39（1）： 57

混合導電材料電導率的測試方法研究····························································魏麗酈 ,劉雪琪 ,童雨竹 ,袁夢輝 ,董文靜 39（2）： 1

Mo對650 ℃高溫鈦合金組織和性能的影響······································郭佳林 ,董燕妮 ,岳 旭 ,陳秉剛 ,王鼎春 ,劉建榮 ,王清江 39（2）： 6

工藝參數對鋁合金微齒輪熱擠壓成形的影響········································································陳澤中 ,程志龍 ,李雪源 ,趙 娜 39（2）： 12

Al,K和Si對鉬粉還原及燒結過程的影響·················································卜春陽 ,李文虎 ,劉博洲 ,董洪峰 ,王 娜 ,莊 飛 39（2）： 18

POSS功能化鑭系稀土配合物雜化材料的制備與表征······························································································胡 皓 ,李 穎 39（2）： 23

石墨相氮化碳表面包覆改善鋰離子電池正極材料LiCoO2電化學性能的研究·················································毛立浩 ,薛亞楠 ,周云龍 ,左元慧 ,康詩飛 ,崔立峰 39（2）： 28

Y含量對Mg-Zn-Y非晶合金性能的影響····························································任 帥 ,何美鳳 ,王 浩 ,潘 登 ,周錕廣 39（2）： 35

熱交換器翅片用親水鋁箔預處理工藝控制·········································································································李高林 39（2）： 42

碳膜材料的熱學性能及研究進展········································································邱漢迅 ,閆廷龍 ,李幸娟 ,楊俊和 39（2）： 46

韓國POSCO公司的鎂業務進展·········································································································羅 曄 39（2）： 56

架空電力線路用導體材料的研究現狀和發展方向··········································································································黃崇祺 39（3）： 1

生物醫用開孔泡沫鋅的制備及力學性能·····························································祖國胤 ,李志剛 ,胡 磊 ,黃 鵬 ,穆永亮 39（3）：11

多主元FeNiMnCr0.75Alx高熵合金微觀結構和力學性能的研究·······························································································張威威 ,李榮斌 39（3）：18

共價有機多孔稀土雜化材料的制備與性能····················································································梁亞東 ,李 穎 ,王 霞 39（3）：23

淬火方式對薄壁軸承套圈變形的影響········································································馮紀偉 ,王智勇 ,王秉楠 ,李 錚 39（3）：28

軋制工藝和退火溫度對TC4ELI鈦合金厚板顯微組織的影響··················································王 儉 ,李有華 ,李 蒙 ,王勤波 ,王 新 ,張永強 39（3）：32

焊接工藝對鎳基焊縫氣孔的影響·······························································································趙曉兵 ,魯艷紅 39（3）：36

基于微波法快速合成短棒狀SBA-15的探析········································································沈 蔚 ,洪周琴 ,羅 超 ,何丹農 39（3）：43

ENYA貼片機提升產能的設備改造·······························································································孫啟偉 ,孟慶輝 39（3）：48

鎂基非晶合金作為生物材料的應用現狀····················································································談正中 ,戚孝群 ,趙一鶴 39（3）：53

PDP用壓延銅箔表面黑化處理研究進展·····························································張 寧 ,劉新寬 ,劉 平 ,江幼平 ,黎曉桃 39（3）：59

GH105合金元素含量對析出相的影響·····························································沈祎舜 ,姚志浩 ,陳筱菲 ,董建新 ,江 河 39（4）： 1

Cu/Ni3Ti原位復合材料的顯微組織和力學性能··················································毛 虎 ,楊宏亮 ,張 正 ,姜 江 ,李永濤 ,史曉斌 39（4）：10

Al-6.6Zn-1.7Mg-0.26Cu合金擠壓材焊接接頭的組織與性能·····························································張 會 ,劉 磊 ,周 楠 ,羅明強 ,胡 權 39（4）：16

硼粉粒度對Li-B合金結構及熱穩定性的影響·······························································································朱 琳 ,盧 丫 39（4）：21

堿土金屬碳酸鹽催化乙醇胺-CO2反應機理研究····················································································周云龍 ,崔立峰 ,史煥聰 39（4）：25

模板法制備La2O3-CexZr1-xO2催化酯交換反應的研究········································································孟志強 ,文振中 ,陳 凱 ,何 垚 39（4）：32

雙氧水還原浸出非洲氧化銅鈷礦的試驗研究·····························································梁偉華 ,鄭世林 ,吳理覺 ,文定強 ,付海闊 39（4）：38

鋁合金導體應用發展歷程及現狀··········································································································吳振江 39（4）：42

航空航天緊固件用鈦合金材料綜述··················································李 蒙 ,鳳偉中 ,關 蕾 ,王 新 ,張永強 ,王 儉 39（4）：49

鎂基非晶合金的研究進展··················································付振闖 ,李 強 ,常春濤 ,劉 芳 ,王新敏 ,潘 登 39（4）：54

無鉛易切削黃銅的發展現狀及發展方向·······································張瀚巍 ,劉 平 ,劉新寬 ,馬鳳倉 ,李 偉 ,何代華 ,陳小紅 39（4）：58

C含量對一種單晶高溫合金組織和持久性能的影響·····················································································史振學，劉世忠，趙金乾 39（5）： 1

TaAgN復合膜顯微結構、力學性能和摩擦性能的研究·····················································································黃 婷，喻利花，許俊華 39（5）： 7

Ni-W-Co三元合金鍍層電鍍工藝的研究···········································································王露露，劉新寬，王 琪，劉 平 39（5）：13

熱處理對釬焊鋁箔翅片料抗下垂性能的影響·····················································································靳丹萍，劉歡歡，趙 杰 39（5）：19

Ca和Sn對提升機控制手柄用Mg-Al-Zn-Si合金性能的影響······················································趙瑞峰，安 琴，張清正，張 永，石桂林，李 峰 39（5）：24

交叉軋制對TA1鈦箔材組織和性能的影響································································李 蒙，關 蕾，鳳偉中，王 新，張永強 39（5）：28

高抗力金屬板帶材多輥冷軋機特點分析································································································韓 晨，孫付濤 39（5）：33

高頻焊鋁合金冷凝器集流管線能量的研究································································································曹國富，曹麗珠 39（5）：39

超彈性β-Ti合金研究進展······················································馬廣昊，李 強，常春濤，何美鳳，王新敏，潘 登 39（5）：46

低壓鑄造法制備鋁基復合材料的研究現狀···········································································鄭小秋，謝世坤，易榮喜，郭秀艷 39（5）：51

光電催化還原CO2金屬氧化物催化材料研究進展······················································張瑞新，蔡 晴，王燕剛，康詩飛，左元慧，崔立峰 39（5）：58

無鍍鎳銅鋁低溫釬焊工藝研究·······························································曹凱，劉平，劉新寬，王子延，張卓，曹蒙云 39（6）： 1

固體酸催化混合胺的CO2解吸性能分析·····················································································曹一凡，史煥聰，崔立峰 39（6）： 7

氮化硅光固化增材制造工藝與性能的研究··············································································嚴鵬飛，嚴彪，王聯鳳，程靈鈺 39（6）：12

ProCAST在汽車輪轂制造中的應用···································································································鐘強強，王晶 39（6）：16

銅排表面質量的影響因素及控制方法································································································黃路稠，高育紅39（6）：23

新型生物醫用鈦合金的設計及應用進展·························································麻西群，于振濤，牛金龍，余森，劉少輝，賀新杰 39（6）：26

鎢的釬焊研究進展·····················································································陳遠亭，李先芬，陳柏炎 39（6）：32

微納結構硅在鋰離子電池中的研究現狀··············································································劉旭燕，吳曉龍，楊敏，朱新杰 39（6）：37

氫氧化鎂基阻燃劑的研究進展··········································································································謝超飛 39（6）：44

支架用NiTi合金的表面改性方法研究進展·······················································································張涵，張柯，劉平，田浩 39（6）：48