2021年4期
刊物介紹
The Chinese Journal of Chemical Engineering (Bimonthly, started in 1982) is the official journal of the Chemical Industry and Engineering Society of China and published by the Chemical Industry Press. The aim of the journal is to develop the international exchange of scientific and technical information in the field of chemical engineering. It publishes original research papers that cover the major advancements and achievements in chemical engineering in China as well as some articles from overseas contributors. The topics of journal include chemical engineering, chemical technology, biochemical engineering, energy and environmental engineering and other relevant fields. Papers are published on the basis of their relevance to theoretical research, practical application or potential uses in the industry as Research Papers, Research Notes, Chemical Engineering Data and Reviews. Prominent domestic and overseas chemical experts and scholars have been invited to form an International Advisory Board and the Editorial Committee. It enjoys recognition among Chinese academia and industry as a reliable source of information of what is going on in chemical engineering research, both domestic and abroad.
Chinese Journal of Chemical Engineering
- A comprehensive review of the effect of different kinetic promoters on methane hydrate formation
- An experimental study on the choked flow characteristics of CO2 pipelines in various phases
- Hydrothermal and entropy generation specifications of a hybrid ferronanofluid in microchannel heat sink embedded in CPUs
- Experimental and Numerical Study of Gas-Liquid Flow in a Sectionalized External-Loop Airlift Reactor
- Numerical simulation of heavy fuel oil atomization using a pulsed pressure-swirl injector
- Experimental research on steady-state operation characteristics of gas–solid flow in a 15.5 m dual circulating fluidized bed system
- Thermal performance assessment of self-rotating twisted tapes and Al2O3 nanoparticle in a circular pipe
- Time-series analysis of the characteristic pressure fluctuations in a conical fluidized bed with negative pressure
- Adopting inclined channel to decline the salinity mixing for rotary energy recovery device:Simulation and optimization
- A numerical study of accelerated moderate or intense low-oxygen dilution (MILD) combustion stability for methane in a lab-scale furnace by off-stoichiometric combustion technology
- A level set based immersed boundary method for simulation of non-isothermal viscoelastic melt filling process
- Experimental study on sand particles accumulation,migration and separation efficiency in slug catcher
- Simultaneously spray-assisted assembling reversible superwetting coatings for oil–water separation
- Static and dynamic studies of adsorption by four macroporous resins to enrich oridonin from Rabdosia rubescens
- Catalytic ozonation of volatile organic compounds (ethyl acetate)at normal temperature
- One-step synthesis of Ni@Pd/NH2-Fe3O4 nanoparticles as affordable catalyst for formic acid dehydrogenation
- Controllable synthesis of polyoxymethylene dimethyl ethers by ionic liquids encapsulated in mesoporous SBA-16
- Kinetic degradation of amoxicillin by using the electro-Fenton process in the presence of a graphite rods from used batteries
- Electrochemical oxidation of Rhodamine B with cerium and sodium dodecyl benzene sulfonate co-modified Ti/PbO2 electrodes:Preparation,characterization,optimization,application
- Dehydrogenation of isobutane to isobutene over a Pt-Cu bimetallic catalyst in the presence of LaAlO3 perovskite
- 2-Hydroxy-1,4-napthoquinone solubilization,thermodynamics and adsorption kinetics with surfactant
- Effect of preparation methods on the hydrocracking performance of NiMo/Al2O3 catalysts
- Selective catalytic reduction failure of low NH3-NOx ratio
- Numerical investigation of granular mixing in an intensive mixer:Effect of process and structural parameters on mixing performance and power consumption
- Pore plugging effects on the performance of ZSM-5 catalyst in MTP reaction using a discrete model
- Vacuum pressure swing adsorption process for coalbed methane enrichment
- High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption:Optimization and mechanism study
- Experimental results for the vapor–liquid equilibria of(formaldehyde+1,3,5-trioxane+methanol+salt+water) systems and comparison with predictions
- Tailoring polymeric composite gel beads-encapsulated microorganism for efficient degradation of phenolic compounds
- Hydrogenolysis of organosolv hydrolyzed lignin over high-dispersion Ni/Al-SBA-15 catalysts for phenolic monomers
- An efficient route towards R-2-phenoxypropionic acid synthesis for biotransformative production of R-2-(4-hydroxyphenoxy)propionic acid
- Investigation of the methane hydrate surface area during depressurization-induced dissociation in hydrate-bearing porous media
- Effect of operating parameters on the performance of thermally regenerative ammonia-based battery for low-temperature waste heat recovery
- Synthesis and characterization of a series of cross-linked polyamines for removal of Erichrome Black T from aqueous solution
- Investigation on the fabrication of lightweight aggregate with acid-leaching tailings of vanadium-bearing stone coal minerals and red mud
- Performance evaluation of the incorporation of different wire meshes in between perforated current collectors and membrane electrode assembly on the Passive Direct methanol fuel cell
- Modified corn-core powder for enhancing sludge dewaterability:Synthesis,characterization and sludge dewatering performance
- Synthesis of cation exchange resin-supported iron and magnesium oxides/hydroxides composite for nitrate removal in water
- Fabrication of a highly efficient new nanocomposite polymer gel for controlling the excess water production in petroleum reservoirs and increasing the performance of enhanced oil recovery processes
- An advanced ash fusion study on the melting behaviour of coal,oil shale and blends under gasification conditions using picture analysis and graphing method
- Evaluation of oxygen uncoupling characteristics of oxygen carrier using micro-fluidized bed thermogravimetric analysis
- Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage
- Comparative study of different hydro-dynamic flow in microbial fuel cell stacks
- Modeling viscosity of methane,nitrogen,and hydrocarbon gas mixtures at ultra-high pressures and temperatures using group method of data handling and gene expression programming techniques
- Synthesis and characterization of high strength polyimide/silicon nitride nanocomposites with enhanced thermal and hydrophobic properties
- Synthesis of zinc oxide nanoparticles reinforced clay and their applications for removal of Pb (II) ions from aqueous media
- Preparation and antibacterial properties of polycaprolactone/quaternized chitosan blends
- Synthesis and optimization of high surface area mesoporous date palm fiber-based nanostructured powder activated carbon for aluminum removal
- Structure-dependent re-dispersibility of graphene oxide powders prepared by fast spray drying