一種用于提升用戶機授時精度的時鐘準確度校正方法
戴群雄1,2,安云飛1,2,戎強1,2
(1.中國電子科技集團公司第五十四研究所,石家莊 050081;
2.河北省衛星導航技術與裝備工程技術研究中心,石家莊 050081)
摘要:基于衛星導航系統定位授時原理,分析了用戶機時鐘與系統時間鐘差對授時精度的影響,提出了一種用于提升用戶機授時精度的時鐘準確度校正方法,即:根據系統時間良好的長穩特性對用戶機時鐘的準確度進行校正,減小用戶機時鐘與系統時間鐘差,并提升鐘差修正的精度,從而達到提升用戶機授時精度的目的。通過實驗驗證了該方法的可行性與有效性。
關鍵詞:時鐘準確度;鐘差;授時精度;校正
doi:10.13442/j.gnss.1008-9268.2015.05.006
中圖分類號:TN965.5
文獻標志碼:A
文章編號:1008-9268(2015)05-0030-04
收稿日期:2015-06-11
作者簡介
Abstract:Based on positioning and time service principle of satellite navigation, this paper analysed the influence on time service precision by user receiver’s clock and system time clock offset, put forward a sort of clock accuracy correction method used to enhance time service precision of user receiver, namely: proceeded clock accuracy correction of user receiver’s clock according to the good long-term stability characteristics of system time, to reduce user receiver’s clock and system time offset and enhance the correction precision of clock offset, so as to beat the target of enhancing time service precision of user receiver. The feasibility and effectiveness of the proposed method were verified by experiments.
0引言
時間是一個基本的物理量,時間信息是人們日常生活中的重要因素。隨著科技的快速發展,人們開始建立越來越多的電子信息系統,如TDMA衛星通信系統、民用蜂窩式移動通信系統、集群管理控制系統等[1],這些系統的建立,使得人們對時間精度的要求越來越高。近年來,衛星導航系統迅速崛起,時間服務正朝著大范圍、實時性的方向發展,全球范圍內越來越多的用戶群體從中受益,人們對時間的準確度和精度的認知和應用提升到了一個新的高度。
在衛星導航系統中,用戶機在空間參考系中的位置坐標(X,Y,Z),通過測量衛星和用戶機之間的距離來獲得[2]。一旦明確用戶機在空間參考系中的位置坐標,就能夠計算出用戶機時鐘相對于系統時間的鐘差,根據鐘差對用戶機時鐘進行修正,實現用戶機時間和系統時間同步。……