以4,4′-聯苯二甲酸和咪唑基化合物為配體的鈷配合物的合成和晶體結構

張　鳳　劉光祥

(南京曉莊學院化學系，南京市新型功能材料重點實驗室,南京　211171)

?

以4,4′-聯苯二甲酸和咪唑基化合物為配體的鈷配合物的合成和晶體結構

張鳳劉光祥＊

(南京曉莊學院化學系，南京市新型功能材料重點實驗室,南京211171)

摘要：以4,4′-聯苯二甲酸(H2BPDC)和4,4′-二咪唑基二苯醚(BIDPE)為原料,與硝酸鈷在不同溫度下反應,得到2個結構不同的配位聚合物{[Co2(BPDC)2(BIDPE)2(H2O)]·2H2O}n(1)和{[Co(BPDC)(BIDPE)]·H2O}n(2)。對它們進行了元素分析、紅外光譜分析,并利用X射線衍射測定了它們的單晶結構。配合物1屬于單斜晶系，C2/c空間群，a=1.456 02(15) nm, b=1.557 51(16) nm, c=2.522 6(3) nm,β=90.834 0(10)°, V=5.720 2(10) nm3, Z=4, Mr=1 256.98, Dc=1.460 g·cm(-3),μ=0.655, F(000)=2 592, R1=0.036 7, wR2=0.087 5(I＞2σ(I))。配合物2屬于三斜晶系，P1空間群，a=1.061 92(10) nm, b=1.098 51(11) nm, c=1.324 51(13) nm,α=112.725 0(10) nm,β= 92.112 0(10)°,γ=96.574 0(10)°, V=1.410 2(2) nm3, Z=2, Mr=619.48, Dc=1.459 g·cm(-3),μ=0.662, F(000)=638, R1=0.047 4, wR2=0.116 5 (I＞2σ(I))。單晶結構分析顯示，配合物1擁有一維鏈狀結構，而配合物2具有二維兩重貫穿結構，并表現出聚輪烷的結構特征。結果說明了反應溫度在配合物組裝過程中起著非常重要的作用。

關鍵詞：鈷配合物；雙咪唑配體；芳香羧酸配體；晶體結構

國家自然科學基金(No.21271106)和教育部科學技術重點項目(No.210102)資助。＊通信聯系人。E-mail：njuliugx@126.com

0 Introduction

The design and synthesis of coordination polymers (CPs) are of great interest, not only because of their intriguing variety of architectures and topologies, but also because of their tremendous potential applications in nonlinear optics, catalysis, gas absorption, luminescence, and magnetism[1-4]. However, the rational design and synthesis of CPs with unique structure and function still remain a long-term challenge. The resultant structural framework is frequently influenced by various factors such as medium, pH value of solution, temperature, the nature of metal ions, coordination geometry, and a number of coordination donors provided by organic ligands[5-10]. From a synthetic point of view, the judicious selection of appropriate organic ligands and coordination geometries of the metals is proved to be one of the most effective ways to manipulate the versatile structures of CPs[11-12].

Among the various types of organic ligands, imidazole and its derivatives are often employed to fabricate CPs because of their strong coordination abilities and relatively versatile coordination geometries[13-15]. The V-shaped ligand 4,4′-bis(imidazole -l-yl)diphenyl ether (BIDPE) has previously been justified as an efficient and versatile organic building unit for construction of coordination architectures[16-18]. For BIDPE, which features three special characteristics: ?the free rotation of the imidazolyl ring can improve the flexibility of the polymeric frameworks to meet the requirement of coordination geometries of metal ions for tuning the fine structure.The long size makes it an excellent candidate to generate CPs of entangled topology.The V-shaped conformation can form coordinative loops or rings which are beneficial for the assembly of polyrotaxane- and polycatenane-like motifs. More importantly, recent studies indicate that utilizing mixed ligands is an effective route to construct intriguing CPs with attractive topological structures[19-22]. Such a dual-ligand strategy offers great promise for the construction of target frameworks with high complexities due to the presence of distinct donors which can coordinate with metal centers through different coordination modes. With a view to develop possible synthetic strategies, the employment of mixed N- and O-donor ligands would be a feasible method to build coordination architectures with interesting topologies and remarkable functionalities[23-27]. As is known, polycarboxylate ligands are excellent coligands for the construction of highly connected, different dimensional frameworks due to their versatile bridging modes. However, investigation of the BIDPE-carboxylate mixed-ligand system remains largely unexplored. Thus, the development of comprehensive research on this topic is necessary. Considering all of the above-mentioned, we prepared two new coordination polymers, namely, {[Co2(BPDC)2(BIDPE)2(H2O)]·2H2O}n(1) and {[Co(BPDC)(BIDPE)]·H2O}n(2). Herein, we report their syntheses, crystal structures and thermal properties.

1 Experimental

1.1 Materials and general methods

All chemicals and solvents were of reagent grade and used as received without further purification. The BIDPE ligand was synthesized according to the reported method[28]. Elemental analyses (C, H and N) were performed on a Vario ELⅢelemental analyzer. Infrared spectra were recorded on KBr discs using a Nicolet Avatar 360 spectrophotometer in the range of 4 000～400 cm-1. Thermogravimetric analyses (TGA) were performed on a Netzsch STA-409PC instrument in flowing N2with a heating rate of 10℃·min-1. Powder X-ray diffraction (PXRD) patterns wereobtained on Bruker D8 Advance X-ray diffractometer with Cu Kα radiation (λ=0.154 056 nm) at room temperature.

1.2 Synthesis of {[Co2(BPDC)2(BIDPE)2(H2O)]· 2H2O}n(1)

A mixture containing Co (NO3)2·6H2O (29.6 mg, 0.1 mmol), H2BPDC (24.2 mg, 0.1 mmol), BIDPE (30.2 mg, 0.1 mmol) and NaOH (8.0 mg, 0.2 mmol) in 15 mL of deionized water was sealed in a 25 mL Teflon lined stainless steel container and heated at 120℃for 3 days. Purple platy crystals of 1 were collected by filtration and washed with water and ethanol several times with a yield of 53% based on BIDPE ligand. Anal. Calcd. for C64H50N8O13Co2(%): C, 61.15; H, 4.01; N, 8.91. Found(%): C, 61.16; H, 4.03; N, 8.92%. IR (KBr, cm-1): 3 462 (br), 3 122 (w), 1 610 (s), 1 558 (s), 1 521 (s), 1 423 (m), 1 389 (s), 1 276 (w), 1 242 (s), 1 171 (w), 1 133 (w), 1 102 (w), 1 083 (s), 1 040 (m), 987 (w), 892 (s), 827 (w), 782 (w), 672 (w), 573 (w), 547 (w).

1.3 Synthesis of {[Co(BPDC)(BIDPE)]·H2O}n(2) Complex 2 was prepared by a process similar to that yielding complex 1 at 180℃by using Co(NO3)2·

6H2O (29.6 mg, 0.1 mmol), H2BPDC (24.2 mg, 0.1 mmol), BIDPE (30.2 mg, 0.1 mmol) and NaOH (8.0 mg, 0.2 mmol) in 15 mL of deionized water. Purple block crystals of 2 were collected by filtration and washed with water and ethanol several times with a yield of 44% based on BIDPE ligand. Anal. Calcd. for C32H24N4O6Co (%): C, 62.04; H, 3.90; N, 9.04. Found (%): C, 62.02; H, 3.89; N, 9.05. IR (KBr, cm-1): 3 459 (br), 3 061 (w), 1 608 (s), 1 523 (m), 1 358 (s), 1 275 (m), 1 200 (s), 1 124 (w), 1 034 (w), 1 009 (s), 835 (m), 802 (s), 638 (w), 594 (m), 519 (m), 478 (m).

1.4 X-ray crystallography

Two block single crystals with dimensions of 0.22 mm×0.20 mm×0.08 mm for 1 and 0.20 mm×0.18 mm× 0.16 mm for 2 were mounted on glass fibers for measurement, respectively. X-ray diffraction intensity data were collected on a Bruker APEXⅡCCD diffractometer equipped with a graphite-monochromatic Mo Kα radiation (λ=0.071 073 nm) using the φ-ω scan mode at 293(2) K. Data reduction and empirical absorption correction were performed using the SAINT and SADABS program[29], respectively. The structures were solved by the direct method using SHELXS-97[30]and refined by full-matrix least squares on F2using SHELXL-97[31]. All of the non-hydrogen atoms were refined anisotropically. The details of the crystal parameters, data collection and refinement for 1 and 2 are summarized in Table 1, and selected bond lengths and angles with their estimated standard deviations are listed in Table 2.

CCDC: 1429769 1; 1429770, 2.

Table1　Crystal data and structure refinement for 1 and 2

Continued Table 1

Table2　Selected bond lengths(nm) and angles(°) for 1 and 2

Fig.1 Coordination environments of the Coatoms in 1 with the ellipsoids drawn at the 30% probability level

2 Results and discussion

2.1 Crystal structure

Single crystal X-ray diffraction analysis revealed that complex 1 crystallizes in the monoclinic space group C2/c and features a one-dimensional chain structure based on triply bridged binuclear units. As illustrated in Fig.1, the asymmetric unit of complex 1 contains one crystallography independent cobalt ion, one unique BPDC dianions, one entire BIDPE molecule, a half ligated water molecule located on a crystallographic 2-fold axis and a lattice watermolecule. The cobalt ion possesses a distorted [CoO4N2] octahedral coordination environment with a cis orientation of its nitrogen donors, which belong to two different BIDPE ligands. Bond lengths and angles about the cobalt ion are standard for octahedral coordination (Table 2). Three of the oxygen donors belong to three different BPDC anions, while the remaining coordination site is occupied by an aqua ligand. Each BPDC anion serves as an exotridentate linker, connecting two cobalt ions at one carboxylate terminus in a bis-bridging binding mode with a third cobalt ion via the other carboxylate locus in a monodentate binding mode. The aqua ligand serves to bridge two Coions in a μ2-fashion; two Coions are in turn also bridged by two carboxylate termini from two different BPDC anions to form a triply bridged binuclear unit. These have a Co…Co distance of 0.357 7 nm, with the two bridging carboxylate groups situated 45.66°apart. Individual binuclear units are connected into a 1D [Co2(BPDC)2(BIDPE)2(μ2-H2O)]nchain motif, coursing along c-axis, by means of the monodentate carboxylate termini of the BPDC anions (Fig.2). The Co…Co contact distance through the full extent of the DBA dianionic tethers is 1.444 9 nm. The BIDPE ligands fosters a Co…Co distance of 1.468 4 nm. Adjacent [Co2(BPDC)2(BIDPE)2(μ2-H2O)]nchains are conjoined along the a and b axes by intermolecular weak interactions to construct the 3D supramolecular network (Fig.3).

Fig.2 View of 1D [Co2(BPDC)2(BIDPE)2(μ2-H2O)]nchain motif in 1

Fig.3 Molecular packing diagram projected along a axis in 1

Changing the temperature from 120 to 180℃for the same reaction mixture of 1 affords complex 2, which crystallizes in the triclinic P1 space group and shows a 2D→2D entanglement pattern with polycatenane features. The asymmetric unit of 2 contains one crystallographically independent Coion, one individual BIDPE ligand, two halves BPDC anions located on inversion centres and one lattice water molecule. As depicted in Fig.4, each Cois four-coordinated by two oxygen atoms from two BPDC anions and two nitrogen atoms from the imidazole groups of two BIDPE ligands, exhibiting a slightly distorted octahedral geometry. All chemical bonds fall in the normal ranges[32]. In 2, every two V-shaped BIDPE ligands are joined by two Coions to form a Co2(BIDPE)2ring with Co…Co separation of 1.504 8 nm and meanwhile all these rings are connected by BPDC anions to generate a 1D linear necklace-likechain along the b axis. These parallel chains are further bridged through the BPDC anions into a twodimensional layer (Fig.5) and neighboring layers are interpenetrated with each other in a parallel fashion to give an entangled 2D→2D double-layer (Fig.6). Undoubtedly, the structure of 2 can be described as a metal-organic polycatenane framework.

Fig.4 Coordination environments of the Coatoms in 2 with the ellipsoids drawn at the 30% probability level

Fig.5　 Perspective view of the 2D layer structure in 2

Fig.6 Perspective view of the 2D→2D polycatenane-like framework in 2

Complexes 1 and 2 were obtained under similar reactions at different reaction temperatures. At lower temperature, the carboxylate anions in 1 display monodentate and bis(bridging) modes, whereas in 2, there is only one bis(monodentate) coordination fashion. The different coordination modes of the Coion and different frameworks of 1 and 2 clearly showthat the formation of the framework is influenced by classical thermodynamic factors, such as condensation due to entropy driven dehydration reaction at higher temperature.Transformationreactionshavebeenstudied extensively by modifying reaction conditions[33-35], but to our knowledge this is the first attempt in CPs of aromatic carboxylates and V-shaped bis (imidazole) ligands where the temperature effects have been investigated and correlated with the structure.

2.2 FTIR spectra

The IR spectra of 1 and 2 show the absence of the characteristic bands at around 1 700 cm-1attributed to the protonated carboxylate group indicates that the complete deprotonation of H2BPDC ligand upon reaction with Co ion. The presence of vibrational bands of 1 610 ～1 558 cm-1are characteristic of the asymmetric stretching of the deprotonated carboxylic groups of BPDC2-anion. The difference between asymmetric and symmetric carbonyl stretching frequencies (Δν=νasym-νsym) was used to fetch information on the metal-carboxylate binding modes. Complex 1 shows two pairs of νasymand νsymfrequencies at 1 610, 1 423 (Δν=187) and 1 558, 1 389 (Δν=169) cm-1for the carbonyl functionality indicating two coordination modes as observed in the crystal structure. Complex 2 showed a pairs of νasymand νsymfrequencies at 1 608, 1 358 (Δν=250) cm-1corresponding to the carbonyl functionality of dicarboxylate ligand indicating a symmetric monodentate coordination mode. OH stretching broad bands at 3 462 cm-1for 1 and at 3 459 cm-1for 2 are attributable to the coordinated lattice water. The bands in the region of 640～1 250 cm-1are attributed to the -CH- in-plane or out-of-plane bend, ring breathing, and ring deformation absorptions of benzene ring. The IR spectra exhibit the characteristic peaks of imidazole groups at ca. 1 520 cm-1[36].

Fig.7 TGA curves of complexes 1 and 2

Fig.8 PXRD patterns of complexes 1 and 2

2.3 Thermal stability and powder X-ray diffraction (PXRD)

To examine the thermal stabilities of complexes 1 and 2, TG analyses were carried out (Fig.7). The TGA study of complex 1 shows a weight loss of 4.42% from 30 to 210℃, corresponding to the loss of two lattice water molecules and one coordinated water molecule (Calcd. 4.27% ). Then the TG curve presents a platform and frame starts to decompose at 310℃. In the case of complex 2, a little weight loss is observed from 30 to 90℃due to the release of one lattice water molecule, with a weight loss of 3.01% (Calcd. 2.90%). Furthermore, the decomposition of 2 occurs upon 315℃.

Powder X-ray diffraction analysis (PXRD)experiments were carried out for 1 and 2 at room temperature to characterize their purity. As shown in Fig.8, the measured peak positions closely match the simulated peak positions, indicative of pure products.

References:

[1] Long J R, Yaghi O M. Chem. Soc. Rev., 2009,38:1213-1214

[2] Liu K, Shi W, Cheng P. Coord. Chem. Rev., 2015,289:74-122

[3] Zhou H C, Kitagawa S. Chem. Soc. Rev., 2014,43:5415 -5418

[4] Ma L, Abney C, Lin W. Chem. Soc. Rev., 2009,38:1248-1256

[5] Guo X M, Guo H D, Zou H Y, et al. CrystEngComm, 2013, 15:9112-9120

[6] Zhao F H, Jing S, Che Y X, et al. CrystEngComm, 2012,14: 4478-4485

[7] Shen L J, Gray D, Masel R I, et al. CrystEngComm, 2012, 14:5145-5147

泰國、印度等國家醫療旅游發展經驗告訴我們，一個地區之所以成為具有競爭力的醫療旅游目的地，是由許多因素共同決定的：醫療基礎設施、休閑設施、高質量的醫療服務人才、合理的價格(交通、住宿、醫療等)等。因此，海南在加快提升醫療服務水平和能力建設的同時，還需要進一步提高旅游公共服務體系建設，包括安全便捷高效的交通基礎設施建設，價格合理、服務優質、符合國際標準的酒店、餐飲以及景區建設；通曉國際規則和精通多國外語的國際旅游人才隊伍建設；信息準確、及時的醫療旅游門戶網站建設等。

[8] Stock N, Biswas S. Chem. Rev., 2012,112:933-969

[9] Guo H D, Guo X M, Zou H Y, et al. CrystEngComm, 2014, 16:7459-7468

[10]Liu G X, Zhu K, Chen H, et al. CrystEngComm, 2008,10: 1527-1530

[11]Pan M, Su C Y. CrystEngComm, 2014,16:7847-7859

[12]Ding J G, Yin C, Zheng L Y, et al. RSC Adv., 2014,4: 24594-24600

[13]Yao X Q, Pan Z R, Hu J S, et al. Chem. Commun., 2011, 47:10049-10051

[14]Li S B, Sun W L, Wang K, et al. Inorg. Chem., 2014,53: 4541-4547

[15]Phan A, Doonan C J, Uribe-Romo F J, et al. Acc. Chem. Res., 2010,43:58-67

[16]Hu J S, Shang Y J, Yao X Q, et al. Cryst. Growth Des., 2010,10:4135-4142

[18]Hu J S, Huang L F, Yao X Q, et al. Inorg. Chem., 2011,50: 2404-2414

[19]Hauptvogel I M, Bon V, Grünker R, et al. Dalton Trans., 2012,41:4172-4179

[20]Kim D, Lah M S. CrystEngComm, 2013,15:9491-9498

[21]Cao T T, Peng Y Q, Liu T, et al. CrystEngComm, 2014,16: 10658-10673

[22]Li Y W, Li D C, Xu J, et al. Dalton Trans., 2014,43:15708-15712

[23]Jiang H L, Tatsu Y, Lu Z H, et al. J. Am. Chem. Soc., 2010, 132:5586-5587

[24]Liu X M, Lin R B, Zhang J P, et al. Inorg. Chem., 2012,51: 5686-5692

[25]Han L W, Lu J, Lin Z J, et al. CrystEngComm, 2014,16: 1749-1754

[26]Kongpatpanich K, Horike S, Sugimoto M, et al. Chem. Commun., 2014,50:2292-2294

[27]Das M C, Guo Q S, He Y B, et al. J. Am. Chem. Soc., 2012, 134:8703-8710

[28]Liu G X, Zha X C, Wang Y, et al. J. Inorg. Organomet. Polym., 2012,22:258-263

[29]Sheldrick G M. SADABS. Program for Empirical Absorption Correction of Area Detector Data, University of G?ttingen, Germany, 1996.

[30]Sheldrick G M. SHELXS-97, Program for Crystal Structure Solution, University of G?ttingen, Germany, 1997.

[31]Sheldrick G M. SHELXL-97, Program for the Refinement of Crystal Structure, University of G?ttingen, Germany, 1997.

[32]Liu Y, Qi Y, Su Y H, et al. CrystEngComm, 2010,12:3283 -3290

[33]Dan M, Rao C N R. Angew. Chem., Int. Ed., 2006,45:281-285

[34]Li B, Dai X M, Meng X G, et al. Dalton Trans., 2013,42: 2588-2593

[35]Ma J, Jiang F L, Chen L, et al. CrystEngComm, 2012,14: 4181-4187

[36]Nakamoto K. Infrared and Raman Spectra of Inorganic and Coordinated Compounds. 5th Ed. New York: Wiley & Sons, 1997.

Syntheses and Crystal Structures of Two CobaltCoordination Polymers Constructedfrom 4, 4′-Biphenyldicarboxylate and Bis(imidazole) Ligands

ZHANG Feng LIU Guang-Xiang＊
(Key Laboratory of Advanced Functional Materials of Nanjing, Department of Chemistry, Nanjing Xiaozhuang University, Nanjing 211171，China)

Abstract:Two cobaltcoordination polymers, {[Co2(BPDC)2(BIDPE)2(H2O)]·2H2O}n(1) and {[Co(BPDC)(BIDPE)]· H2O}n(2) (H2BPDC=4, 4′-biphenyldicarboxylic acid and BIDPE=4, 4′-bis(imidazole-l-yl)diphenyl ether), have been synthesized and characterized by IR spectroscopy, elemental analyses and single-crystal X-ray diffraction. Complex 1 crystallizes in monoclinic, space group C2/c with a=1.456 02(15) nm, b=1.557 51(16) nm, c=2.522 6(3) nm,β= 90.834 0(10)°, V=5.720 2(10) nm3, Mr=1 256.98, Dc=1.460 g·cm(-3), F(000)=2 592,μ=0.655 mm(-1)and Z=4. The final R1is 0.036 7 and wR2is 0.087 5 for 4 258 observed reflections (I＞2σ(I)). Complex 2 belongs to triclinic, space group P1 with a=1.061 92(10) nm, b=1.098 51(11) nm, c=1.324 51(13) nm,α=112.725 0(10)°,β=92.112 0(10)°,γ= 96.574 0(10)°, V=1.410 2(2) nm3, Mr=619.48, Dc=1.459 g·cm(-3), F(000)=638,μ=0.662 mm(-1)and Z=2. The final R1is 0.047 4 and wR2is 0.116 5 for 3 871 observed reflections (I＞2σ(I)). Structural analyses reveal that complex 1 features a one-dimensional chain structure based on triply bridged binuclear units, which is further interlinked into a higher-dimensional supramolecular framework by intermolecular weak interactions, whereas complex 2 possesses a 2-fold parallel interpenetrating network consist of two identical sets of 2D layer motifs and shows polycatenane char-book=684,ebook=133acters. The results show that reaction temperature plays a significant role in the structure of the final products. CCDC: 1429769 1; 1429770, 2.

Keywords:cobalt coordination polymer; bis(imidazole) ligands; polycarboxylate; crystal structure

收稿日期：2015-10-26。收修改稿日期：2016-01-18。

DOI：10.11862/CJIC.2016.083

中圖分類號：O614.81+2

文獻標識碼：A

文章編號:1001-4861(2016)04-0683-08