Theoretical and Applied Mechanics Letters

?

Theoretical and Applied Mechanics Letters

Editors-in-Chief

Jiachun Li

Institute of Mechanics,Chinese Academy of Sciences,China

Yonggang Huang

Northwestern University,USA

Associate Editor-in-Chief(Deputy)

Guowei He,Institute of Mechanics,Chinese Academy of Science s,China

Associate Editors-in-Chief

Xu Guo,Dalian University of Technology,China

Philip L-F.Liu,Cornell University,USA

Jian Lu,City University of Hong Kong,China

Jinjun Wang,Beihang Universtiy,China

Jian Xu,Tongji University,China

Youhe Zhou,Lanzhou Universtiy,China

Editorial Board Members

AnandKrishnaAsundi,NanyangTechnologicalUniversity,

Singapore

Francois Barthelat,McGill University,Canada

Luca Brandt,KTH Royal Institute of Technology,Sweden

Sue Ann Campbell,University of Waterloo,Canada

Mark Jason Cassidy,The University of Western Australia,

Australia

Changqing Chen,Tsinghua University,China

Qingyan Chen,Purdue University,USA

Weiqiu Chen,Zhejiang University,China

Shanyi Du,Harbin Institute of Technology,China

Daining Fang,Peking University,China

Xiqiao Feng,Tsinghua University,China

Fuping Gao,Institute of Mechanics,Chinese Academy of

Sciences,China

Mohamed S.Ghidaoui,The Hong Kong University of

Science and Technology(HKUST),China

Stanislav N.Gorb,University of Kiel,Germany

John Grue,University of Oslo,Norway

Yuantong Gu,Queensland University of Technology,

Australia

X.Edward Guo,Columbia University,USA

David L.Hu,Georgia Institute of Technology,USA

Baohua Ji,Beijing Institute of Technology,China

Hanqing Jiang,Arizona State University,USA

Zonglai Jiang,Shanghai Jiao Tong University,China

Christian Joachim K¨ahler,Universit¨at der Bundeswehr

M¨unchen,Germany

SatoshiKishimoto,NationalInstituteforMaterials

Science,Japan

Heinz Konietzky,TU-Bergakademie Freiberg,Germany

Alexander M.Korsunsky,University of Oxford,UK

Jiangyu Li,University of Washington,USA

Junfeng Li,Tsinghua University,China

Yulong Li,Northwestern Polytechnical University,China

Chwee Teck Lim,National University of Singapore,

Singapore

Members of Advisory Board

Dick van Campen,Eindhoven University of Technology,

Netherlands

Frederic Dias,University College Dublin,Ireland

Narinder K.Gupta,Indian Institute of Technology,India

Mohd Nordin Hasan,ICSU Regional Office for Asia and

the Pacific,Malaysia

Hua Liu,Shanghai Jiao Tong University,China

Qingquan Liu,Institute of Mechanics,Chinese Academy of

Sciences,China

Caishan Liu,Peking University,China

Lifeng Ma,Xi'an Jiaotong University,China

Mingjiu Ni,University of the Chinese Academy of

Sciences,China

Wenxia Pan,Institute of Mechanics,Chinese Academy of

Sciences,China

John Patterson,The University of Sydney,Australia

Gareth Pender,Heriot-Watt University,UK

YuriPetrov,InstituteforProblemsofMechanical

Engineering,Russian Academy of Sciences,Russia

Serge Simoens,University of Lyon,CNRS,France

Jizhou Song,Zhejiang University,China

Jinhua Sun,The University of Science and Technology of

China,China

Jianjun Tao,Peking University,China

Bingqing Wei,University of Delaware,USA

Yujie Wei,Institute of Mechanics,Chinese Academy of

Sciences,China

Marian Wiercigroch,University of Aberdeen,UK

Huimin Xie,Tsinghua University,China

Huilin Xing,The University of Queensland,Australia

Feng Xu,Beijing Jiaotong University,China

Jinhua Ye,National Institute for Materials Science,Japan

Jiemin Zhan,Sun Yat-sen University,China

Chuanzeng Zhang,University of Siegen,Germany

QingchuanZhang,TheUniversityofScienceand

Technology of China,China

Yapu Zhao,Institute of Mechanics,Chinese Academy of

Sciences,China

Xiaojing Zheng,Xidian University,China

David Z.Zhu,University of Alberta,Canada

Luoding Zhu,Indiana Univ-Purdue University,USA

Tsutomu Kambe,Institute of Dynamical Systems,Japan

Miles B.Rubin,Technion Israel Institute of Technology, Israel

Zhemin Zheng,Institute of Mechanics,Chinese Academy of Sciences,China

Managing Editor(Editorial Office)

Haixuan Chen,The Chinese Society of Theoretical and Applied Mechanics,China(Email:chenhx@cstam.org.cn)

Assistant Editors(Editorial Office)

Fei Cong,The Chinese Society of Theoretical and Applied Mechanics,China

Xiaoyan Wang,The Chinese Society of Theoretical and Applied Mechanics,China

Aims and Scope

The bimonthly produced journal Theoretical&Applied Mechanics Letters(TAML),founded in 2011,is an international peer-reviewed journal for the purpose of publishing more letter papers.TAML intends to publish original,significant but short articles in all aspects of theoretical and applied mechanics,as well as other interdisciplinary areas,such as aerospace and aeronautical engineering,coastal and ocean engineering,environmental and energy engineering,material and structure engineering,biomedical engineering,mechanical and transportation engineering,and civil and hydraulic engineering.The journal is open to contributions from all the above areas,highlight original advances in science,engineering,and technology.

This journal and the individual contributions contained in it are protected under copyright,and the following terms and conditions apply to their use in addition to the terms of any Creative Commons or other user license that has been applied by the publisher to an individual article:

Photocopying

Single photocopies of single articles may be made for personal use as allowed by national copyright laws.Permission is not required for photocopying of articles published under the CC BY license nor for photocopying for non-commercial purposes in accordance with any other user license applied by the publisher.Permission of the publisher and payment of a fee is required for all other photocopying, including multiple or systematic copying,copying for advertising or promotional purposes,resale,and all forms of document delivery. Special rates are available for educational institutions that wish to make photocopies for non-profit educational classroom use.

Derivative Works

Users may reproduce tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions or companies.Other than for articles published under the CC BY license,permission of the publisher is required for resale or distribution outside the subscribing institution or company.

For any subscribed articles or articles published under a CC BY-NC-ND license,permission of the publisher is required for all other derivative works,including compilations and translations.

Storage or Usage

Except as outlined above or as set out in the relevant user license,no part of this publication may be reproduced,stored in a retrieval system or transmitted in any form or by any means,electronic,mechanical,photocopying,recording or otherwise,without prior written permission of the publisher.

Permissions

For information on how to seek permission visit www.elsevier.com/permissions or call:(+44)1865 843830(UK)/(+1)215 239 3804 (USA).

Author rights

Author(s)may have additional rights in their articles as set out in their agreement with the publisher(more information at http://www. elsevier.com/authorsrights).

Notice

No responsibility is assumed by the publisher for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise,or from any use or operation of any methods,products,instructions or ideas contained in the material herein. Because of rapid advances in the medical sciences,in particular,independent verification of diagnoses and drug dosages should be made. Although all advertising material is expected to conform to ethical(medical)standards,inclusion in this publication does not constitute a guarantee or endorsement of the quality or value of such product or of the claims made of it by its manufacturer.

Editorial information

ISSN:2095-0349E-ISSN:2095-0349

CN:11-5991/O3

CODEN:TAMLBX

Administrated by:Chinese Academy of Sciences(CAS)

Sponsored by:Institute of Mechanics,CAS(IMCAS)

The Chinese Society of Theoretical and Applied Mechanics(CSTAM)

Editorial Office of TAML:Address:No.15 Beisihuanxi Road,Beijing 100190,China

Tel:+86-10-82543904

Theoretical&Applied Mechanics Letters 6(2016)

Email:taml@cstam.org.cn