基于條紋反射測量技術的太陽能熱發電聚光鏡面形檢測方法研究

盧振武 魏秀東

摘 要：提出了基于條紋反射測量技術的太陽聚光器面形檢測方法，使用投影儀在光屏上投射黑白相間的正弦條紋，經被測鏡反射后成像于相機，采用四步相移算法計算像面上和光屏上點的對應關系，然后運用迭代算法擬合被測鏡方程及鏡面上各個點法線方向。面形測量精度達0.2 mrad。試驗驗證了測量方法的正確性和可行性，研制了測量設備原理樣機，并進行了相關測量試驗，結果表明，測量設備達到了國際先進水平。

關鍵詞：太陽能熱發電 條紋反射測量技術 四步相移算法

Abstract：A surface shape measurement method for the solar concentrator based on fringe reflection technique has been proposed. The sinusoidal black and white fringes are projected at a screen by the projector. The camera captures the image of the fringes reflected by the tested mirror.The corresponding points between the image plane and the screen can be calculated by using the four-step phase-shifting algorithm， and then the tested mirror surface equation can be fitted by using an iterative algorithm.The normal direction of the tested mirror can be calculated.The accuracy of the measurement method is about 0.2mrad.The correctness and feasibility of the measurement methods has been verified by experiments. A prototype of measurement equipment and software has been developed.The measurement experiments show that the equipment has reached the international advanced level.

Key Words：Solar Thermal Power；Fringe Reflection Technique；Four-step Phase-shifting Algorithm

閱讀全文鏈接（需實名注冊）：http：//www.nstrs.cn/xiangxiBG.aspx？id=50193&flag=1&flag=1